Indoor medium-voltage single-phase coil molded potential transformers for power systems ≦ 7.2 kV. Laminated-core & cut-core models. 2 primary-side fuses. Circuit breaker operation power source (EP-6SFK).
Mounted on switchgear (3.3/6.6 kV) as an auxiliary power source for circuit breaker operation. Insulated with Araldite® epoxy, these potential transformers also feature a Class-F heat-resistant insulation material for the coils. Two fuses on the primary side offer protection against overload and short circuit currents.
Indoor grounding potential transformer with a fuse on each of the 3 phases on the primary side. Used with measuring or monitoring instruments, or for ground-fault protection. 5-legged laminated core. Coils insulated with Araldite® epoxy.
1-pole potential transformers for 12/24/36 kV power systems. Use with measuring or monitoring instruments, or with protective relays. Optional connector and epoxy housing with a built-in primary fuse. Insulated with Araldite® epoxy.
Widely used for 12~24 kV power systems and insulated with Araldite® epoxy, these potential transformers are characterized by superior moisture resistance and excellent electrical properties. Customizable for different standards and requirements.
Designed for 24kV 4-way switchgear, this MV single-pole potential transformer features a high-voltage elbow-type connector on the primary side and a built-in high-voltage fuse for protection. Exterior coated with a metal conductive mixture for shielding. Secondary side sealed and waterproof. Araldite® epoxy as insulation.
Intended for power companies, this indoor single-phase epoxy-cast potential transformer is designed to be mounted inside the SF6 gas-insulated MOF (Metering Outfit) panel of a 25.5 kV (max.) power system. With an added tap in the secondary winding, this PT can offer two voltage ratios (120/60:1).
1-phase potential transformer for the measuring and monitoring of the voltage signal. Max continuous output: 4000VA. Combination with 1 or 2 smaller-capacity potential transformers forms a 3-phase potential transformer. Cast in self-extinguishing Araldite® epoxy resin.
Cast in Araldite® UV-resistant cycloaliphatic epoxy, these potential transformers for billing are designed for long-term outdoor use in harsh conditions such as solar ultraviolet radiation, salt fog, high temperature, and high humidity. Designed to be part of a Metering Outfit (MOF).
Indoor potential transformers for ≦ 36kV power systems. IEC type testing & environmental testing (-45℃~65℃). The choice of major corporations of numerous countries. Insulated with Araldite® epoxy. Superior moisture resistance.
Intended for the switchgear panels of a 36kV power system, this single-pole epoxy-cast potential transformer for indoor application is covered with an aluminum box. The grounded aluminum box for shielding reduces the installation space requirement.
- Home Main Page
- About Us The Company
Products All Categories
- Current Transformers
- Potential Transformers
- Distribution Transformers
- Distribution Panel Components
- LV/MV Electrical Reactors
- Epoxy Bushings and Epoxy Insulators
- Voltage Monitoring Insulators & Voltage Indicators
- Secondary Overvoltage Protectors for Current Transformers
- Current Sensors
- Electronic Energy Meters
- Electric Vehicle Chargers
- Industrial Hardware
- Newsroom Latest Information
- Contact Customer Service