Coil Molded Current Transformer with Cut Core, 10kV


Coil Molded Current Transformer with Cut Core, 10kV

EW-10SH

Cut-core, medium-voltage, indoor-use, coil molded current transformer intended for a 12kV (max.) power system and suited for measuring or monitoring instruments. Insulated with Araldite® epoxy resin.

Medium-Voltage Coil Molded Current Transformer

About the Product

Intended for a 12kV (max.) power system and suited for measuring or monitoring instruments, this coil molded current transformer with a cut core is insulated with Araldite® epoxy resin. With a fine exterior, this medium-voltage current transformer for indoor use is compact and easy to install.

Specifications

  • Standard: IEC or IEEE*
  • Indoor application
  • Coil molded
  • High-grade silicon steel core
  • Current Ratio: ≦ 400/5A
  • System Voltage: ≦ 12 kV
  • Frequency: 50/60 Hz
  • AC/BIL: 28/75 kV
  • Ith = 16 kA/1S
  • Burden / Accuracy: 40VA/1.0
  • Approx. Weight: 7 kg

Coil Molded Current Transformers (Selection Table)

Model

System
Voltage

Primary
Current

Secondary
Current
Burden /
Accuracy

Ith
(Max.)

AC/BIL
(kV)

Approx.
Weight
(kg)

Num.
Of
Cores

Core 1

Core 2

EW-3S

3.6 kV

10~400A

5A / 1A

-

40VA/1.0

16 kA/1S

10/40

5

1

EW-3C

3.6 kV

10~300A

5A / 1A

5A / 1A

15VA/5P10
+ 25VA/0.5

or

15VA/5P10
+ 30VA/1.0

9

2

EW-10SH

12 kV

5~400A

5A / 1A

-

40VA/1.0

28/75

7

1

* Other standards and specifications available

Related Products
  • Coil Molded Current Transformer, 3kV
    Coil Molded Current Transformer, 3kV
    EW-3S

    For measuring or monitoring instruments, this medium-voltage, indoor, coil molded current transformer is often used with the main panel or the motor control panel of a 3.6kV (max.) power system. Insulated with Araldite® epoxy resin. Compact and easy to install.


  • Two-Core Coil Molded Current Transformer with Cut Cores, 3kV
    Two-Core Coil Molded Current Transformer with Cut Cores, 3kV
    EW-3C

    2-core (core type: cut-core), medium-voltage coil molded current transformer. Often used with the main panel or the motor control panel of a 3.6kV (max.) power system. Good for protection. Suited to measuring and monitoring instruments. Araldite® epoxy resin.


  • 10kV Two-Core Current Transformers
    10kV Two-Core Current Transformers
    EWF-10D Series

    2-core current transformers designed for 12kV (max.) power systems for use with measuring (or monitoring) instruments and protective relays, these products are cast in Araldite® epoxy and meet the requirements of all major electrical standards.


  • Overvoltage Protector for Current-Transformer Protection
    Overvoltage Protector for Current-Transformer Protection
    CCTP-03

    When a power system is in operation, it is imperative that the secondary of the current transformer(s) should not have an open circuit. When an open circuit occurs, an extremely high transient voltage will be induced, which can in turn damage the current transformers and the instruments at the secondary, or even posing a threat to personal safety. This CT secondary overvoltage protector offers protection from such accidental damage caused by secondary transient voltage.



Download Materials

  • Tag
  • Instrument Transformers
  • CT
  • CT PT
  • MV Current Transformers
  • Current Transformers
  • Medium Voltage Current Transformers
  • Medium-Voltage Current Transformers