20kV Two-Core Current Transformer (“U-Shaped Top” Design)
About the Product
This two-core current transformer is designed for a 20~24 kV power system and to be used in conjunction with measuring or monitoring instruments, along with protective relays. Insulated with Araldite® epoxy, this indoor-use current transformer is designed with a “U-shaped top”, which creates distance between the primary terminals and other equipment. This design increases electrical safety and shortens the necessary distance between two current transformers that are installed side-by-side, thus reducing the required width of the switchgear panel.
- For indoor application
- Cast in Araldite® epoxy resin
- Standards: IEC or IEEE
- System Voltage: ≦ 24kV
- Frequency: 50/60 Hz
- AC/BIL: 50/125 kV
- Benefits: Increased electrical safety; reducing the width of the switchgear panel
- Additional specification or customization may be requested to comply with various electrical standards or special requirements.
Burden / Accuracy
5A or 1A
5A or 1A
30VA/5P20 + 30(15)VA/1.0(0.2)
- Related Products
2-core current transformer for a 20~24kV power system. Used in conjunction with measuring or monitoring instruments, and with protective relays. Epoxy cast. Designed to have greater creepage, it is appropriate for polluted regions.
EWF-20DA, EWF-20DB, EWF-20DD, EWF-20DE, EWF-20DS
For use in conjunction with energy meters or protective relays. Available in single-core, 2-core, and 3-core models. Insulated with Araldite® epoxy resin. Custom-made to meet various requirements.
When a power system is in operation, it is imperative that the secondary of the current transformer(s) should not have an open circuit. When an open circuit occurs, an extremely high transient voltage will be induced, which can in turn damage the current transformers and the instruments at the secondary, or even posing a threat to personal safety. This CT secondary overvoltage protector offers protection from such accidental damage caused by secondary transient voltage.
- Download Materials
Easy-to-print document, containing product description, specifications, and a selection table.
How to select, based on application and power system attributes, the primary and secondary currents, burden, accuracy, rated frequency, type (indoor vs. outdoor), insulation material, etc.