Epoxy-Cast Window-Type Current Transformers for Indoor Application, 3kV
About the Product
Insulated with Araldite® epoxy resin and designed for indoor use, these window-type current transformers are suited for the main panel or motor control panel of a medium-voltage (≦ 3.6 kV) power system. Good for protection and appropriate for measuring and monitoring instruments, these current transformers are available in both 2-core and single-core models. The window-type design facilitates installation and wiring with a busbar or insulated cables, which decreases the occurrence rate of contact point failure. The CR-3S Series current transformers are characterized by a high degree of moisture resistance, as well as superior physical and electrical properties.
- Standards: IEC or IEEE
- Two-core & single-core models
- Indoor usage
- Epoxy cast (Araldite® epoxy resin)
- Rated Voltage: ≦ 3.6 kV
- Frequency: 50 or 60 Hz
- AC/BIL: 10/40 kV
- Other specifications upon request
Other standards and specifications available.
* Window diameter varies according to models
CR-3S-30, CR-3S-60, CR-3S-70, CR-3S-90, CR-3S-45A, CR-3S-60A, CR-3S-75A, CR-3S-130A, CR-3S-90B , CR-3S-140B
- Related Products
Offering a higher rated current ratio, this medium-voltage, two-core current transformer is suited to the main panel or the motor control panel of a 3.6kV (max.) power system and can be used with measuring or monitoring instruments, or with protective relays. Araldite® epoxy resin.
For the need of a higher current ratio and accuracy. A greater window diameter facilitates installation and wiring in a high-current application. Multi-ratio models available. Araldite® epoxy.
Intended for the main panel or the motor control panel of a 3.6/7.2 kV power system and designed to be used with measuring or monitoring instruments, or with protective relays. Each CT has a busbar terminal. Insulated with Araldite® epoxy resin.
Indoor medium-voltage single-phase coil molded potential transformers for power systems ≦ 7.2 kV. Laminated-core & cut-core models. 2 primary-side fuses. Circuit breaker operation power source (EP-6SFK).
Mounted on switchgear (3.3/6.6 kV) as an auxiliary power source for circuit breaker operation. Insulated with Araldite® epoxy resin, these potential transformers also feature a Class-F heat-resistant insulation material for the coils. Two fuses on the primary side offer protection against overload and short circuit currents.
Indoor grounding potential transformer with a fuse on each of the 3 phases on the primary side. Used with measuring or monitoring instruments, or for ground-fault protection. 5-legged laminated core. Coils insulated with Araldite® epoxy resin.
- Download Materials
Easy-to-print document, containing product description, specifications, and a selection table.
How to select, based on application and power system attributes, the primary and secondary currents, burden, accuracy, rated frequency, type (indoor vs. outdoor), insulation material, etc.